Berkeley Electronic Press Selected Works. Synology Surveillance Station License Keygen 6 test. Serial numbers for Synology Surveillance Station 8: Synology Surveillance Station 8 serial number. 100% 54 minutes ago. Surveillance Station. How to crack Synology Surveillance Station with proper method. The proper method is cracking the MAX.
- Synology Surveillance Station
- Synology Surveillance Station License Keygen
- Station 6 Restaurant Metairie
- Synology Surveillance Station License
- Synology Surveillance Station 6 License Crack Recovery
Synology Camera License Packs are designed for expanding cameras setup on the Synology Surveillance Station. By default, two camera licenses are installed. By applying the license key on the Surveillance Station user interface, you will be able to set up and manage more cameras on the network. How to crack Synology Surveillance Station 8.1.0. // serial number to synology servers (synosurveillance.synology.com) to verify whether someone // is not already using this key. // // Some engineer at synology forgot to remove function GenerateKey from the libsynoss1.so library // which takes two numbers (camera count and unique id) and generates the string with license key. A crack does not exist, and if it did, for every update Synology gives to the Surveillance Station software, the system will be checked for a valid license. So there is no use in trying to trick the app. Synology also makes it possible to remote-lock the keygen in use.
I have tried to decompile library by IDA - different architecture = different instructions set and registers. The function GetLicenseCount(void) is on these addresses: LOAD:002069F8; DWORD ShmLicenseCountCache::GetLicenseCount(ShmLicenseCountCache.hidden this) LOAD:002069F8 EXPORT ZNK20ShmLicenseCountCache15GetLicenseCountEv LOAD:002069F8 ZNK20ShmLicenseCountCache15GetLicenseCountEv LOAD:002069F8; CODE XREF: SSKeyMgr::GetLicenseCountInfo(int.,int.)+4A�p LOAD:002069F8 LDR R0, R0,#0x1C LOAD:002069FA BX LR LOAD:002069FA; End of function ShmLicenseCountCache::GetLicenseCount(void) I have tried something, but without effect. But I suggest You to disable updates Surveillance station - actually I think that there is chance to patch It. There is also discussion about patching. I played a bit with libsynoss.so.1 and IDA Disassebler. Good to hear that we're getting somewhere. Unfortunately your.so file doesn't work for me.
How to crack Synology Surveillance Station 8.1.0 with proper method. The proper method is cracking the MAX FREE CAMERA. Free license, the max camera you can attach are 2 cameras. This is hardcoded. All you have to do is change it to whatever number you want. My NAS is DS216+II, it is x64 Celeron Processor.
I think we should clarify what hardware and software we use. Mine is:. Synology DS216play. DSM 5.2 build 5644. Synology Survailance Station 7.1 build 4056 I tried decompiling libsynoss1.so using IDA 6.8. Decided to start over once again and I got: DS216play nm -D /var/packages/SurveillanceStation/target/lib/libsynoss1.so grep GenerateKey 00131644 T Z11GenerateKeyiiRSs Is 00131644 the address I should be looking for?
I'll try some decompiling and comparing.so files tomorrow and will get back to you. If you have any suggestions or hints I'll be glad to hear them.:-). I tried It on: Synology DS216play DSM 6.0 7321 Synology Survailance Station 7.2.1 build 4602 When I executed that command I got nothing: nm: /var/packages/SurveillanceStation/target/lib/libsynoss1.so: No symbols So You can try use this code, which is mentioned above: In my patched library I removed instruction which call function ShmLicenseCountCache::GetLicenseCount and set directly return value in register R0 on any integer. But there is problem when Synology is restarted - It checks how many cameras are enabled and how many cameras I have licensed. So there happens mismatch and Surveillance disable all cameras.
How to crack Synology Surveillance Station 8.1.0 with proper method. The proper method is cracking the MAX FREE CAMERA. Free license, the max camera you can attach are 2 cameras. This is hardcoded. All you have to do is change it to whatever number you want. My NAS is DS216+II, it is x64 Celeron Processor.
I think we should clarify what hardware and software we use. Mine is:. Synology DS216play. DSM 5.2 build 5644. Synology Survailance Station 7.1 build 4056 I tried decompiling libsynoss1.so using IDA 6.8. Decided to start over once again and I got: DS216play nm -D /var/packages/SurveillanceStation/target/lib/libsynoss1.so grep GenerateKey 00131644 T Z11GenerateKeyiiRSs Is 00131644 the address I should be looking for?
I'll try some decompiling and comparing.so files tomorrow and will get back to you. If you have any suggestions or hints I'll be glad to hear them.:-). I tried It on: Synology DS216play DSM 6.0 7321 Synology Survailance Station 7.2.1 build 4602 When I executed that command I got nothing: nm: /var/packages/SurveillanceStation/target/lib/libsynoss1.so: No symbols So You can try use this code, which is mentioned above: In my patched library I removed instruction which call function ShmLicenseCountCache::GetLicenseCount and set directly return value in register R0 on any integer. But there is problem when Synology is restarted - It checks how many cameras are enabled and how many cameras I have licensed. So there happens mismatch and Surveillance disable all cameras.
I have tried it already with different versions and I'm still getting errors like: Loading library=/var/packages/SurveillanceStation/target/lib/libsynoss1.so. Error /var/packages/SurveillanceStation/target/lib/libsynoss1.so: undefined symbol: ZTI14SqlFilterParamDS216play or Loading library=/var/packages/SurveillanceStation/target/lib/libsynoss1.so. Error /var/packages/SurveillanceStation/target/lib/libsynoss1.DDSDS2DS216playDS216pDS216plDS21DDDDDS2DDS21DSDS2DSDSDDDDSDS2DDS216DDSDSD From what I understand this is caused by either me putting wrong address of GenerateKey or maybe this code doesn't work for DS216play architecture. Either way I'm gonna try something more tomorrow.
I can only do this: 1, I can connect more cameras. But when I restart Surveillance station, manually enabling all cameras is required.
Or 2, I can connect more cameras. But when I open live view, Surveillance forbid all cameras. Restarting OK. In patching a tried replacing instructions LDR something, something for example LDR R0, R0,#0x20 by MOVS R0, 15 which is in hexa 0F20 in functions like ShmLicenseCountCache::GetLicenseCount, ShmLicenseCountCache::GetDefaultLicenseCnt, SSKey::GetLicenseCount, ShmLicenseCountCache::GetKeyCount. I have already updated my DSM and Surveillance Station to the same version as yours and applied the patch. Yesterday I was able to add my 6 cameras and they are recording since then. They got disabled only once - probably when I accessed Live View throught DSM.
However I tried to repeat it today and it works all the time. Maybe it has to do with the fact I'm accessing my Synology remotely now. I'm also able to view my cameras feed through iOS and Android DS Cam app. I'll post some more details as I find out when it stops working. You are welcome. I do not have idea, where should be another changes.
Surveillance somewhere else checks count of enabled cameras and there get know mismatch - disable cameras. By the way, 's patch has similar problem after restarting. I have also DS214play where everything works correct, but I use patched library which was posted on Xpenology forum: It should be good to compare this library with no-patched (for x86 DS214play) and find differences.
If You want, I can send You another patch, where live view works, but after restart is required to manually enable all cameras. I'm hoping someone can help me here. I downloaded the patch v0.61 version, it worked perfect on Surveillance station on a DS209+II with SurveillanceStation-ppc853x-6.1-2983.spk.
That was only a test, I really need to test it on a DS1511+. I tried the current version (7.2.3-4664) with the same patch and it fails to find the addresses to patch. I downloaded the older version of the package SurveillanceStation-x8664-7.2.3-4602.spk. The patch says it worked but if I try to install it it says the package can not be installed because the software can not be downgraded.
I assume the newest version changed the address to a place that the patch can not find. Can someone update the patch to work on the latest version? Or can someone patch my file? A great BIG Thanks to all of you in advance. Hi guys, first of all, merry christmas:) I've a 1813+ (DSM 6.0.2-8451 Update 7 & SS 7.2.4-4683) and i've tried both methods with no luck. With the first method, via the SS Patcher, i've replaced libsynoss1.so but nothing happen. With the second method, i've successfully installed the optware-devel package but there is no way to find the crosstool-native one.
After some errors (fixed including stdio.h and cstdlib in the source code) the binary was successfully made but it fails (on executing) when it loads the first.so. Any help is appreciated. Regards, Danny. On my ds213j, uninstall the latest version of ss.
Manually installed Synology Survailance Station 7.2.1 build 4602 after patched with above 0.6.1 patcher. It now supports 255 licenses! I just noticed I can only add up to 5 cameras even though the 'Total' says 255 (It also says 'Maximum for Local Device: 5'). This is strange.
Anyone has the same issue? I used the easiest way just patched through the SS patcher 0.6.1.
Should I manually update the libsynoss1.so file? What value should I search and replaced?
Error on script valky.eu:/ DSM 6.1 - SS 7.2.0-4556 X64 Loading library=libpq.so.5. Loading library=libstdc.so.6.
Loading library=libsynosdk.so.6. Loading library=libcrypt.so.1. Loading library=libicui18n.so.56. Loading library=libicuuc.so.56. Loading library=libicudata.so.56. Loading library=libxml2.so.2.
Loading library=libm.so.6. Loading library=libdl.so.2.
Loading library=libpam.so.0. Loading library=libpthread.so.0.
Loading library=librt.so.1. Loading library=libjson.so. Loading library=libsynobandwidth.so. Onan k1000 manual.
Loading library=libcurl.so.4. Loading library=libdsm.so.6. Loading library=libsynoutils.so.1. Loading library=libsynoddnsclient.so. Loading library=libsynoacl.so.
Loading library=libcurl.so.4. Loading library=libsynoldap.so.6. Loading library=libcrypto.so.1.0.0. Loading library=libssl.so.1.0.0. Loading library=libsynosmtp.so. Loading library=libfindhost.so.1.
Loading library=libncurses.so.5. Loading library=libsqlite3.so.0. Loading library=libsynodb.so.
Loading library=linux-vdso.so.1. Loading library=libgccs.so.1. Loading library=libc.so.6. Loading library=ld-linux-x86-64.so.2.
Loading library=/usr/lib/dbd/libdbdsqlite3.so. Loading library=/usr/lib/dbd/libdbdpgsql.so. Loading library=/usr/local/packages/ /lib/workers/libsynoesfilterworker.so. Loading library=/usr/lib/libcupsfilters.so. Loading library=/var/packages/SurveillanceStation/target/lib/libsynoss0.so. Loading library=/var/packages/SurveillanceStation/target/lib/libsynoss1.so.
Error /var/packages/SurveillanceStation/target/lib/libsynoss1.so: undefined symbol: ZTI14SqlFilterParam. DSM 5.2 - SS 7.0-3742 x86 Loading library=libpq.so.5.
Loading library=libstdc.so.6. Loading library=libsynosdk.so.5. Loading library=libcrypt.so.1. Loading library=libicui18n.so.22.
Synology Surveillance Station 6 License Crack
Loading library=libicuuc.so.22. Loading library=libicudata.so.22. Loading library=libxml2.so.2.
Loading library=libm.so.6. Loading library=libdl.so.2. Loading library=libpam.so.0.
Loading library=libpthread.so.0. Loading library=librt.so.1.
Loading library=libjson.so. Loading library=libsynobandwidth.so. Loading library=libsynowimax.so. Loading library=libcurl.so.4. Loading library=libdsm.so.5. Loading library=libsynoutils.so.1.
Loading library=libsynowimax.so. Loading library=libbackup.so.
Loading library=libsynoacl.so. Loading library=libcurl.so.4.
Loading library=libsynoldap.so.5. Loading library=libcrypto.so.1.0.0. Loading library=libssl.so.1.0.0. Loading library=libsynosmtp.so.
Loading library=libjpeg.so.62. Loading library=libfindhost.so.1. Loading library=libncurses.so.5.
Loading library=libsqlite3.so.0. Loading library=libsynodb.so. Loading library=libsynocgi.so.5. Loading library=libgoogleauth.so. Loading library=libpam.so.0.
Loading library=libwebapi.so. Loading library=libwebapi-DSM5.so. Loading library=libsynogpl.so.5.
Loading library=libsynocoregpl.so.5. Loading library=libsynobandwidth.so.5. Loading library=libhttp-file-outputer.so.5. Loading library=libtaskmanager.so.5.
Loading library=libsynosdk.so.5. Loading library=libxml2.so.2. Loading library=libpthread.so.0. Loading library=libm.so.6. Loading library=libdl.so.2. Loading library=libz.so.1.
Loading library=libjson-c.so.0. Loading library=libsynoglusterfs-dsm.so.5. Loading library=libsynoacl.so. Loading library=libattr.so.1.
Loading library=libsynocore.so.5. Loading library=libcrypt.so.1. Loading library=libicui18n.so.22. Loading library=libicuuc.so.22. Loading library=libicudata.so.22.
Loading library=libsqlite3.so.0. Loading library=libcurl.so.4. Loading library=libsynocredential.so.5. Loading library=libjson.so. Loading library=libsynodb.so.
Loading library=libpq.so.5. Loading library=libxapian.so.15.
Loading library=libgccs.so.1. Loading library=libc.so.6. Loading library=libgccs.so.1. Loading library=libcrypt.so.1. Loading library=libxml2.so.2.
Loading library=libcurl.so.4. Loading library=libc.so.6. Loading library=libpthread.so.0. Loading library=/var/packages/SurveillanceStation/target/lib/libsynoss1.so. Error /var/packages/SurveillanceStation/target/lib/libsynoss1.so: undefined symbol: gpDbgLogCfg.
Hey guys correct me if im wrong, but these are the steps right? I have the DS416play working thanks to and his files.
Quick steps below on how to do this to help others. You must have a 64bit system for this to work! The easiest way to check and see is to go to the Synology Download Center and put in your Model, then go to Packages Surveillance Station and download the SPK package. If the name of the file that's downloading looks like this (SurveillanceStation-x8664-8.1.0-5406.spk) (note the x8664) you're in business, you have a 64bit system! Download the files from here Manualy install the SPK package using the Package Center on the DSM. Stop the Surveillance Station from running.
Synology Surveillance Station
Use WINSCP to upload the cracked files to the Synology, I put them in /tmp/ and made a folder called ssfiles. SSH into the Synology using the admin credintials.
Synology Surveillance Station License Keygen
Type sudo -i to get to the root user then type synouser -setpw root PASSWORD to set the root user password. SSH back into the box using the root credintials. I used the following commands to copy the files then set the permisions. Is the 415 using this package? SurveillanceStation-x8664-8.0.3-5159.spk (I cannot get SurveillanceStation-x8664-8.1.0-5406.spk working) install that, stop the service then log in via ssh. Then I did a sudo su first then here is everything in one single command to get 255 licenses: (i stringed everything together with;'s. The last version SS for Armada370 I can cr.k is SS 7.2.2.4649.
SS 8.1.0.5364 I can crack, but only for i686 and x86x64. These need bytes injecting. Since Armada series doesn't has free byte to be injected, I can't crack it. There's a way by adding new.section. But I don't know how to add new.section in Armada PE file. SS 8.1.1.5408 hard to crack. There's time-bomb in it.
I still can't locate the time-bomb. So forget about it. No1 is able to crack it yet. At least for now. If you wanna, I can send you SS 7.2.2.4649 for Armada370. Reply with your email address.
After I reply OK, you can remove it (by editing it). Your email add? I couldn't share my crk due to I also use them regularly. I do not want my method is blocked by Syno and then I must spend another hundreds of hours just try to crk the new version. You know there's no debugger available to crk this baby. If only there's debugger, craing process will be easier.
We only need few hours. But since no debugger available, what we can do is just try to understand and analyse the protection routine.
Make some notes, byte patching, save the file, try the new crk by shutdown SS and re-run it. Really, very time consuming. : As an experienced(really?) cracker, I never stole/copy someone else work. Yes, I tried his work, it's perfect. But I was in the middle of cracking 8.1.0.
Station 6 Restaurant Metairie
And his method won't work on 8.0.4 and upward anyway. My method on 8.1.0 is totally different compared to homer. I didn't touch any file. I create new file. That's all I can say. You may say I didn't prove anything.
Only use Youtube video as a proof. Did I really crack SS 8.1.0 and SS 8.1.1?
I can't tell more. But assuming me as if I'm failed is a better idea. Yes, the protection of SS 8.1.x is INDEED very hard. You might be the 1st person can crack 8.1.x. These spammy requests are really annoying.
My experience with kyrios21's 8.1.1-5408: I received the latest version (8.1.1-5408) a few weeks ago and tested it intensively. The only real advantage is, as mentioned before, that the streams can be viewed in modern browsers again. But the version has alot of disadvantages too.
The most important ones are that. it stresses the system about 25% more, which also causes higher power consumption and. all cameras are disabled on startup (and randomly while the system is running) because the new version notices that there are no legitimate device licenses. I wrote a script that (more or less) is able to eliminate the 'startup disable' but there is no way to get rid of the random disabling. Therefore, version 8.1.1-5408 cracked isn't a realiable nvr system and imho an unreliable nvr is useless.
Over 2 weeks I monitored the downtimes of single camera streams and in average, every single camera stream was disabled (by the system detection) for appr. 1:20h every day. Understandably, I switched back to 8.0.3 by homer (thanks again!) and I definitely recommend you to do the same. I'm pretty sure that one of the great developers of the previous cracks will take care of a future version, so that it fully works. But until then, why not stick to 8.0.3, I mean is it that bad? To everyone: Please stop spamming, won't send you the crack! Download of 8.0.3-5159 by homer: If you continue spamming your requests I'll upload kyrios21's cracked (but unfunctional) version including my script to stop the spamming.
But I can ensure you installing kyrios crack is just waste of bandwith and time. Maybe one of the others who received the crack can just confirm that. A final word to: You told me that you didn't want to publish the download for your crack to prevent people who could easily afford it or don't deserve it from getting it. I told you my story why I can't afford the license costs and you simply didn't answer, so I think you actually abused all the people here for your personal self aggrandisement. You did a really solid job on the difficult cracking of the version, I don't want to say anything against your work!
Synology Surveillance Station License
But letting all the guys here beg for months is just childish.
Synology Surveillance Station 6 License Crack Recovery
